TELLABS SHDSL MODEMS - Islamabad - make designs online

High-speed modem provides service reliability and differentiation for corporate

LAN interconnection applications.

Overview

The Tellabs®

8110 Network Terminating Unit (CTU-R) is a

network terminating unit (NTU) using extended ETSI HDSL-based

technology. The Tellabs 8110 NTU (CTU-R) has a maximum data

rate of 4,544 Kbps over 2 pairs with integrated IP routing.

The Tellabs 8110 NTU (CTU-R) is connected to the Tellabs®

8100 Managed Access System with the HCQ module of the OMH,

OMH-A and the QMH units. These units support the Tellabs®

8140

Midi Node, Tellabs®

8150 Basic Node, Tellabs®

8160 Accelerator

Node A111 or Tellabs®

8170 Cluster Node. The Tellabs 8110 NTU

(CTU-R) is fully configured and monitored with the Tellabs®

8160

Accelerator Node A111, Tellabs®

8170 Cluster Node, Tellabs®

8184

Access Switch and the Tellabs®

8188 Access Switch. The Tellabs

8110 NTU (CTU-R) does not require any on-site configuration.

Features and Benefits

Applications

The Tellabs 8110 NTU (CTU-R) together with the Tellabs 8100

Ethernet Switching Unit (ESU) makes an efficient solution that

provides service reliability and differentiation for high-speed

corporate LAN interconnection applications.

The Tellabs 8110 NTU (CTU-R) is a high-speed NTU designed

for managed data access with rapid deployment. With a direct

10/100-BaseT Ethernet interface, it is able to offer data access

services without the need for a customer premises WAN routing

infrastructure. Dedicated corporate intranet and Internet access

are typical applications.

Key Benefits

No need for an external customer premises WAN router

Extremely simplified service deployment and maintenance

Up to 4.5 Mbps over 2-pair copper line

Simultaneous IP routing and multiprotocol bridging (BRouter)

Network Address Port Translation (NAPT/NAT) and stateful

packet filtering (access list) functionality for easy and

secure IP access

Service differentiation with Diffserv and VLAN 802.1p prioritization

IP Routing

One 10/100-BaseT Ethernet interface (auto-sensitive),

RJ-45 connector, half- and full-duplex operating modes

3 operating modes:

–  IP routing: static routing, dynamic routing RIPv1, 2,

IP sub-netting and super-netting (CIDR)

–  Bridging: IEEE802.1d and spanning tree for dynamic

redundancy in dual CTU-R configurations

–  Simultaneous IP routing and bridging (BRouter)

Dynamic host configuration protocol (DHCP) relay agent

with up to 2 configurable DHCP servers

Link protocols: PPP and Frame Relay with support for both

bridging (Ethernet frame included) and routing, selective

un-numbered links

PPP link protocol: IP Control Protocol (IPCP), Link

Control Protocol (LCP) and Bridging Control Protocol (BCP)

Frame Relay link protocol: bridged and routed modes

(including bridged Ethernet/802.3 over LAPF in routed

mode), a maximum of 32 Frame Relay DLCIs supported,

LMI protocol supported

Tellabs®

8110 Network Terminating Unit2 TELLABS 8110 NETWORK TERMINATING UNIT (CTU-R) MANAGED BROADBAND DSL ROUTER FP1.3

See tellabs.com for more information about Tellabs Solutions

Network Management

The Tellabs®

8000 Intelligent Network Manager is an extremely

powerful, field-proven, network-level management system with

an easy-to-use Graphical User Interface (GUI).

Graphical provisioning of VLAN VPN connections can be

easily done with the VLAN Manager

Easy configuration of IP parameters NAPT/NAT, packet

filtering, IEEE802.1p and Diffserv functionality

Performance monitoring at L1 and L3 as well as statistics

history from the LAN/DSL interfaces at 15 minute intervals

IP Traceroute and extensive debugging tools for

troubleshooting purposes

LMI protocol status reporting and fault notification functionality

Powerful remote controlled DSL link testing functionality

WAN link congestion and DSL line noise margin monitoring

(which provides a warning when exceeding a defined threshold)

SNMPv1 monitoring

Specifications

Line Interface Features

When connecting the line to Tellabs 8110 NTU (CTU-R), an

automatic control channel establishment will occur for provisioning

the remote Tellabs 8000 Intelligent Network Manager.

Signal Encoding and Impedance

2B1Q, 135 ohms

Transmit Level (dBm)

13.5 dBm

Line Bit Rates (Kbps)

592, 1,168 and 2,320 Kbps (64 Kbps reserved for control

channel traffic)

Connection

1-pair (2-wire)

2-pair (4-wire)

Estimated Maximum Cable Length (cable 0.5 mm/40 nF/km, no noise)

4.7 km @ 2,320 Kbps line rate

6.2 km @ 1,168 Kbps line rate

7.0 km @ 592 Kbps line rate

Line Monitoring

Carrier detection, signal level indication, CRC monitoring

online, noise margin. End-to-end CRC with 8 Kbps

external channel

Other Features

1 1 protection (backup) of the copper line, power off

indication (“dying gasp”)

Operating Modes

1-pair mode

1 x 2,320 Kbps, 1 x 1,168 Kbps, 1 x 592 Kbps

2-pair mode

2 x 2,320 Kbps, 2 x 1,168 Kbps, 2 x 592 Kbps,

data split between the pairs

1 1 backup mode

2 x 2,320 Kbps, 2 x 1,168 Kbps, 2 x 592 Kbps,

one line redundant with the other

Connector Type

RJ-45

Dimensions (width x depth x height)

195 mm x 180 mm x 45 mm, weight 550 g

Power Supply

100-240 VAC

Power Consumption

5 W

Environmental Issues and Standards

One integrated DTE interface is included

in Tellabs 8110 NTU (CTU-S)

G.703 DTE Interface

Specifications

Performance: ETS TS 101 135 V1.4.1 (1998-02)

Storage

ETS 300 019-1-1:1992 Class 1.1

– Temperature

-5° C to 45° C

Transportation

ETS 300 019-1-2:1992 Class 2.3

– Temperature

-40° C to 70° C

Operating Conditions

ETS 300 019-1-7:1992 Class 7.2

Safety and EMC Standards

Safety

EN60950:2000

EMC

EN300 386:20003 TELLABS 8110 NETWORK TERMINATING UNIT (CTU-R) MANAGED BROADBAND DSL ROUTER FP1.3

North America

Tellabs

One Tellabs Center

1415 West Diehl Road

Naperville, IL 60563

U.S.A.

1 630 798 8800

Fax: 1 630 798 2000

Asia Pacific

Tellabs

3 Anson Road

#14–01 Springleaf Tower

Singapore 079909

Republic of Singapore

65 6215 6411

Fax: 65 6215 6422

Europe, Middle East & Africa

Tellabs

Abbey Place

24–28 Easton Street

High Wycombe, Bucks

HP11 1NT

United Kingdom

44 871 574 7000

Fax: 44 871 574 7151

Latin America & Caribbean

Tellabs

Rua James Joule No. 92

EDIFÍCIO PLAZA I

São Paulo – SP

04576-080

Brasil

55 11 3572 6200

Fax: 55 11 3572 6225

The following trademarks and service marks are owned by Tellabs Operations, Inc., or its affiliates in the United States and/or in other countries: TELLABS®

, TELLABS and T symbol®

, T symbol®

, and SMARTCORE®

. Statements herein may contain

projections or other forward-looking statements regarding future events, products, features, technology and resulting commercial or technological benefits and advantages. These statements are for discussion purposes only, are subject to change and are

not to be construed as instructions, product specifications, guarantees or warranties. Actual results may differ materially. The information contained herein is not a commitment, promise or legal obligation to deliver any material, code, feature or functionality.

It is intended to outline Tellabs’ general product direction. The development, release and timing of any material, code, feature or functionality described herein remains at Tellabs’ sole discretion.

© 2011 Tellabs. All rights reserved. 74.1331E  Rev. B   4/11

Supported Standards

RFC791

IP

– RFC1850

OSPF v2 MIB

RFC792

ICMP

– RFC1389

RIPv2 MIB-II Extensions

RFC826

ARP

– RFC2096

IP forwarding table MIB

RFC950

Sub-netting procedure

– RFC1493

Bridge-MIB

RFC1256

ICMP router discovery message

– RFC1661

PPP

RFC1519

CIDR

– RFC1662

PPP in HDLC-like framing

RFC768

UDP

– RFC1332

IPCP

RFC2427

Multiprotocol over Frame Relay

– RFC1638

BCP

RFC1542

DHCP relay agent

– RFC894

IP over Ethernet